NSN 5305-01-434-4612
High Torque Screw
0.464 inches fastener length, flat fillister head style, 0.310 inches head diameter, head height: 0.110 inches .
Manufacturer part number NAS1123-3B for national stock number 5305014344612.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-434-4612.
-
MPN or Model
NAS1123-3B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.464 inches -
Head Style
Flat fillister -
Head Diameter
0.310 inches -
Head Height
0.110 inches -
Grip Diameter
0.188 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3180 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 4820-01-662-8443 MPN 65C26814-2Valve Cover Plate
- 5305-00-007-6186 MPN NAS1100C08-22Machine Screw
- 5305-00-071-2530 MPN MS24678-43Socket Head Cap Screw
- 5305-00-088-9668 MPN MS24693-C54Machine Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
- 5305-00-186-5089 MPN NAS560HK5-4Machine Screw
- 5305-00-205-3920 MPN NAS333CPA62Close Tolerance Screw
- 5305-00-222-2990 MPN NAS601-32PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-434-4612 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123-3B | National Aerospace Standards |