NSN 5305-01-435-0457
High Torque Screw
Between 4.4815 inches and 4.5115 inches fastener length, flat countersunk head style, between 1.643 inches and 1.793 inches head diameter, grip diameter: between 0.8730 inches and 0.8740 inches .
Manufacturer part number BACB30LU14-53 for national stock number 5305014350457.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-0457.
-
MPN or Model
BACB30LU14-53
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
24.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.184 inches -
Fastener Length
Between 4.4815 inches and 4.5115 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.643 inches and 1.793 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.8750 inches -
Grip Length
Between 3.3025 inches and 3.3225 inches -
Thready Qty Per Inch (tpi)
14 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-054-4628 MPN BACB30LU2-2Close Tolerance Screw
- 5305-01-203-6447 MPN 3M927-4L6Close Tolerance Screw
- 5305-01-477-5624 MPN ST3M652C6-11AClose Tolerance Screw
- 5305-01-512-8276 MPN 3M1170D6-14AFClose Tolerance Screw
- 5306-00-505-9885 MPN J646P14AMachine Bolt
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
- 5306-01-044-2986 MPN VAL23607-4-39Shoulder Bolt
- 5306-01-044-5187 MPN VAL23607-6D16Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-0457 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU14-53 | Huck International, Inc. |
BACB30LU14-53 | Valley-todeco, Inc. |
BACB30LU14-53 | Sps Technologies, Llc |
BACB30LU14-53 | Arconic Global Fasteners & Rings, |
BACB30LU14-53 | Federal Manufacturing Corporation |
BACB30LU14-53 | Sps Technologies, Llc |
BACB30LU14-53 | Sps Technologies, Llc |
BACB30LU14-53 | The Boeing Company |
BACB30LU14-53 | Huck Intl Inc |