NSN 5305-01-435-5528
High Torque Screw
Between 2.1575 inches and 2.1875 inches fastener length, flat countersunk head style, between 0.927 inches and 1.019 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number BACB30LU8-23 for national stock number 5305014355528.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-5528.
-
MPN or Model
BACB30LU8-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 2.1575 inches and 2.1875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.927 inches and 1.019 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.5000 inches -
Grip Length
Between 1.4275 inches and 1.4475 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2745 MPN LS15266V3-17Close Tolerance Screw
- 5305-01-032-3465 MPN LS15264-06-7Machine Screw
- 5305-01-057-3065 MPN BACB30ABP8-39AClose Tolerance Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-528-6710 MPN 3M1170C3-19AClose Tolerance Screw
- 5305-01-600-3667 MPN 3M1275E4D13AMachine Screw
- 5305-01-604-8547 MPN 3M1277E4D8ALMachine Screw
- 5306-00-020-1118 MPN VFK100G-07030Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-5528 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU8-23 | Huck International, Inc. |
BACB30LU8-23 | The Boeing Company |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Valley-todeco, Inc. |
BACB30LU8-23 | Arconic Global Fasteners & Rings, |
BACB30LU8-23 | Federal Manufacturing Corporation |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Huck Intl Inc |
BACB30LU8-23 | The Boeing Company |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Valley-todeco, Inc. |
BACB30LU8-23 | Arconic Global Fasteners & Rings, |
BACB30LU8-23 | Federal Manufacturing Corporation |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Huck Intl Inc |
BACB30LU8-23 | The Boeing Company |
BACB30LU8-23 | Arconic Global Fasteners & Rings, |
BACB30LU8-23 | Valley-todeco, Inc. |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Federal Manufacturing Corporation |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Sps Technologies, Llc |
BACB30LU8-23 | Huck Intl Inc |