NSN 5305-01-435-7909
High Torque Screw
Between 2.700 inches and 2.730 inches fastener length, flat countersunk head style, between 1.047 inches and 1.146 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number BACB30LU9-30 for national stock number 5305014357909.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-7909.
-
MPN or Model
BACB30LU9-30
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
Between 2.700 inches and 2.730 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.047 inches and 1.146 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.8650 inches and 1.8850 inches -
Thready Qty Per Inch (tpi)
18 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8414 MPN 3M1170D3-7AFClose Tolerance Screw
- 5306-00-914-3866 MPN STSBG003A14U040Close Tolerance Bolt
- 5306-00-928-9592 MPN VEP220121-4FH4Shear Bolt
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
- 5306-01-161-4011 MPN BACB30NE5D45Close Tolerance Bolt
- 5306-01-195-1585 MPN ST3M753-5-19Shear Bolt
- 5306-01-224-5973 MPN BACB30NF4-71Close Tolerance Bolt
- 5306-01-332-3179 MPN VAL23611-5D013Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-7909 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU9-30 | Sps Technologies, Llc |
BACB30LU9-30 | Valley-todeco, Inc. |
BACB30LU9-30 | Arconic Global Fasteners & Rings, |
BACB30LU9-30 | Federal Manufacturing Corporation |
BACB30LU9-30 | Huck International, Inc. |
BACB30LU9-30 | Sps Technologies, Llc |
BACB30LU9-30 | Sps Technologies, Llc |
BACB30LU9-30 | Sonic Industries Inc. |
BACB30LU9-30 | Sps Technologies, Llc |
BACB30LU9-30 | The Boeing Company |
BACB30LU9-30 | Huck Intl Inc |