NSN 5305-01-435-7922
High Torque Screw
Between 2.825 inches and 2.855 inches fastener length, flat countersunk head style, between 1.047 inches and 1.146 inches head diameter, grip diameter: between 0.5605 inches and 0.5615 inches .
Manufacturer part number BACB30LU9-32 for national stock number 5305014357922.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-7922.
-
MPN or Model
BACB30LU9-32
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
Between 2.825 inches and 2.855 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.047 inches and 1.146 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.9900 inches and 2.0100 inches -
Thready Qty Per Inch (tpi)
18 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-146-7289 MPN LS9362-1153-3Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-403-1520 MPN VFK100G-05004Shear Bolt
- 5306-01-025-4824 MPN GB511B10-20Shear Bolt
- 5306-01-044-8498 MPN VAL23607-4D15Shoulder Bolt
- 5306-01-078-5978 MPN VAL23033-5-4Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-7922 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU9-32 | Huck International, Inc. |
BACB30LU9-32 | Valley-todeco, Inc. |
BACB30LU9-32 | Sps Technologies, Llc |
BACB30LU9-32 | Arconic Global Fasteners & Rings, |
BACB30LU9-32 | Federal Manufacturing Corporation |
BACB30LU9-32 | Sps Technologies, Llc |
BACB30LU9-32 | Sps Technologies, Llc |
BACB30LU9-32 | The Boeing Company |
BACB30LU9-32 | Sps Technologies, Llc |
BACB30LU9-32 | Sonic Industries Inc. |
BACB30LU9-32 | Huck Intl Inc |