NSN 5305-01-435-8744
High Torque Screw
Between 0.725 inches and 0.755 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS7103-6 for national stock number 5305014358744.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-8744.
-
MPN or Model
NAS7103-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.725 inches and 0.755 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-059-3660 MPN MS51958-64Machine Screw
- 5305-00-068-0543 MPN MS24678-11CSocket Head Cap Screw
- 5305-00-104-5074 MPN NAS1352-4LE44PSocket Head Cap Screw
- 5305-00-164-7096 MPN MS27039DD4-22Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-8744 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7103-6 | National Aerospace Standards |