NSN 5305-01-435-9949
High Torque Screw
Nutplat cbore between grip and thd/captive panel fastener.
Manufacturer part number SC1752-4-9P for national stock number 5305014359949.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-435-9949.
-
MPN or Model
SC1752-4-9P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 1.043 inches and 1.073 inches -
Head Style
Flat countersunk -
Head Diameter
0.466 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-170-2952 MPN HT8138-3-3TClose Tolerance Screw
- 5305-00-283-4581 MPN HT8137-3-6ASClose Tolerance Screw
- 5305-00-324-8543 MPN HT8137-4-5Close Tolerance Screw
- 5305-00-929-1658 MPN VT1040-3-2Machine Screw
- 5305-01-054-6286 MPN C7986-6-8Close Tolerance Screw
- 5305-01-142-9913 MPN HT4009-5-15Shoulder Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
- 5305-01-210-1658 MPN HT4060V3-5DShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-435-9949 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1752-4-9P | Arconic Global Fasteners & Rings, |
123370-4-9P | Sps Technologies, Llc |
S00465-4-9P | Boeing Company, The |