NSN 5305-01-436-0789
High Torque Screw
Nutplate cbore between grip and threads/captive panel fastener.
Manufacturer part number SC1752-4-9 for national stock number 5305014360789.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-0789.
-
MPN or Model
SC1752-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 1.043 inches and 1.073 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.509 inches and 0.518 inches -
Grip Diameter
Between 0.2485 inches and 0.2895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard 1st material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-928-9648 MPN 51B335-5Machine Screw
- 5305-01-062-1058 MPN BACB30RF6P13Close Tolerance Screw
- 5305-01-144-0986 MPN HT4020-7-24AXShoulder Screw
- 5305-01-170-8487 MPN HT4057-4-23Close Tolerance Screw
- 5305-01-265-6391 MPN SC1779-5-6Close Tolerance Screw
- 5305-01-303-6353 MPN SC1823-3-8Close Tolerance Screw
- 5305-01-314-5483 MPN SCD1825-5-12Close Tolerance Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-0789 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1752-4-9 | Arconic Global Fasteners & Rings, |