NSN 5305-01-436-0791
High Torque Screw
Nutplate cbore between grip and threads/captive panel fastener.
Manufacturer part number SC1752-4-4P for national stock number 5305014360791.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-0791.
-
MPN or Model
SC1752-4-4P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.730 inches and 0.760 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.509 inches and 0.518 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard 1st material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-478-0475 MPN 756432-1Machine Screw
- 5305-00-814-5939 MPN HT1029A3-2Close Tolerance Screw
- 5305-01-043-5749 MPN HT8100-4-10Close Tolerance Screw
- 5305-01-158-5367 MPN SC2163-5-8Machine Screw
- 5305-01-207-9339 MPN BACS12CK3U10Machine Screw
- 5305-01-228-4232 MPN HT4075V4-10-30Close Tolerance Screw
- 5305-01-284-8386 MPN C7985-4-23Close Tolerance Screw
- 5305-01-296-7786 MPN VT1730-4-89Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-0791 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1752-4-4P | Arconic Global Fasteners & Rings, |
123370-4-4P | Sps Technologies, Llc |
S00465-4-4P | Boeing Company, The |
Stock Check
- NS: 6
- NE: 131