NSN 5305-01-436-1470
High Torque Screw
Between 3.367 inches and 3.397 inches fastener length, flat countersunk head style, between 0.810 inches and 0.889 inches head diameter, grip diameter: between 0.4672 inches and 0.4682 inches .
Manufacturer part number NAS7307A43Y for national stock number 5305014361470.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-1470.
-
MPN or Model
NAS7307A43Y
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 3.367 inches and 3.397 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.810 inches and 0.889 inches -
Grip Diameter
Between 0.4672 inches and 0.4682 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.4375 inches -
Grip Length
Between 2.678 inches and 2.698 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7307 professional/industrial association standard
More from these suppliers
- 5940-00-764-1028 MPN NAS707E4Stud Terminal
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-007-6171 MPN NAS1743C4T8USocket Head Cap Screw
- 5305-00-052-5946 MPN MS35198-4Machine Screw
- 5305-00-052-7004 MPN MS21295-36Socket Head Cap Screw
- 5305-00-054-5655 MPN AESF5C112A00AA6A41Machine Screw
- 5305-00-056-3995 MPN MS21262-90Socket Head Cap Screw
- 5305-00-058-9385 MPN MS51977-63Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-1470 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7307A43Y | National Aerospace Standards |