NSN 5305-01-436-9087
High Torque Screw
Between 1.892 inches and 1.922 inches fastener length, flat countersunk head style, between 0.544 inches and 0.545 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number NAS1975C23T for national stock number 5305014369087.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-436-9087.
-
MPN or Model
NAS1975C23T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.892 inches and 1.922 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.544 inches and 0.545 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Lantirn -
Thread Diameter
0.312 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-343-1444 MPN NAS1063A6-8Terminal Board Marker Strip
- 5305-00-007-1587 MPN NAS1102E02-5PMachine Screw
- 5305-00-057-9594 MPN MS35199-27Machine Screw
- 5305-00-071-1765 MPN MS90725-106Hexagon Head Cap Screw
- 5305-00-071-2503 MPN MS24694A117Machine Screw
- 5305-00-150-3484 MPN NAS1190E3P12Socket Head Cap Screw
- 5305-00-151-9629 MPN MS21093-0202Machine Screw
- 5305-00-159-5566 MPN NAS1190-4P10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-436-9087 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1975C23T | National Aerospace Standards |