NSN 5305-01-437-1258
High Torque Screw
Between 1.501 inches and 1.531 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3731 inches and 0.3737 inches .
Manufacturer part number NAS1166E15L for national stock number 5305014371258.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-437-1258.
-
MPN or Model
NAS1166E15L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 1.501 inches and 1.531 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3731 inches and 0.3737 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Plastic polyamide locking feature -
Material Specification
Ams 4928 assn standard single material response fastener or ams 4967 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjf -
Specification Data
80205-nas1166 professional/industrial association standard
More from these suppliers
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-023-0053 MPN NAS560HK3-26Machine Screw
- 5305-00-059-8251 MPN MS35214-26Machine Screw
- 5305-00-103-2072 MPN NASM35307 P/N MS35307 -419Hexagon Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-151-6197 MPN NAS1635-00-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-437-1258 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1166E15L | National Aerospace Standards |
Stock Check
- NE: 6