NSN 5305-01-438-0362
High Torque Screw
Between 2.329 inches and 2.359 inches fastener length, flat countersunk undercut head style, between 0.5149 inches and 0.5662 inches head diameter, head height: 0.081 inches .
Manufacturer part number NAS1581C6T28 for national stock number 5305014380362.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-0362.
-
MPN or Model
NAS1581C6T28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.329 inches and 2.359 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.5149 inches and 0.5662 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7200 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
A-286 cres, ams5731, 5732, 5737, 5853 assn standard all material responses -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5305-00-057-0535 MPN MS51958-51Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-089-0049 MPN NAS1189C3P7NSocket Head Cap Screw
- 5305-00-107-9312 MPN MS27039C0811Machine Screw
- 5305-00-167-3641 MPN AN525-416-24Machine Screw
- 5305-00-206-3649 MPN NAS517-6-15Machine Screw
- 5305-00-207-0959 MPN MS24678-13Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-0362 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C6T28 | National Aerospace Standards |
10335382 | Nimikkeistokeskus Ncb Finland |
NAS1581C6T28 | National Aerospace Standards |
10335382 | Nimikkeistokeskus Ncb Finland |