NSN 5305-01-438-0364
High Torque Screw
Between 2.454 inches and 2.484 inches fastener length, flat countersunk undercut head style, between 0.5149 inches and 0.5662 inches head diameter, head height: 0.081 inches .
Manufacturer part number NAS1581C6T30 for national stock number 5305014380364.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-0364.
-
MPN or Model
NAS1581C6T30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.454 inches and 2.484 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.5149 inches and 0.5662 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
7200 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
A-286 cres ams5731, 5732, 5737, 5853 assn standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 military specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-502-4359 MPN NAS1666-12Electrical Connector Cable Clamp
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-006-8306 MPN NAS1100C06-4PMachine Screw
- 5305-00-066-7323 MPN NASM24694-C63Machine Screw
- 5305-00-066-7336 MPN NAS1191C02P10Socket Head Cap Screw
- 5305-00-092-6681 MPN MS21125-414Close Tolerance Screw
- 5305-00-151-2525 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-0364 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C6T30 | National Aerospace Standards |
10335383 | Nimikkeistokeskus Ncb Finland |
NAS1581C6T30 | National Aerospace Standards |
10335383 | Nimikkeistokeskus Ncb Finland |