NSN 5305-01-438-0370
High Torque Screw
0.526 inches fastener length, flat fillister head style, between 0.221 inches and 0.226 inches head diameter, head height: between 0.074 inches and 0.086 inches .
Manufacturer part number NAS1121E4 for national stock number 5305014380370.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-0370.
-
MPN or Model
NAS1121E4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.526 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.221 inches and 0.226 inches -
Head Height
Between 0.074 inches and 0.086 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-106SNFElectrical Receptacle Connector
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-9881 MPN NAS1100E04-7PMachine Screw
- 5305-00-060-9744 MPN MS24693-C287Machine Screw
- 5305-00-114-2025 MPN NAS1221-3-3PMachine Screw
- 5305-00-207-1786 MPN NAS517-3-12Machine Screw
- 5305-00-225-9444 MPN MS16996-33Socket Head Cap Screw
- 5305-00-225-9449 MPN MS24677-45CSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-0370 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1121E4 | National Aerospace Standards |
NAS1121E4 | National Aerospace Standards |