NSN 5305-01-438-2232
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, flat fillister head style, between 0.265 inches and 0.270 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1122E6 for national stock number 5305014382232.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-2232.
-
MPN or Model
NAS1122E6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.265 inches and 0.270 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1122 professional/industrial association standard
More from these suppliers
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-008-5888 MPN NAS1102C06-12PMachine Screw
- 5305-00-057-0524 MPN MS51958-28Machine Screw
- 5305-00-082-6982 MPN NAS1190-3P5LSocket Head Cap Screw
- 5305-00-119-7441 MPN NAS1635-08LL7Socket Head Cap Screw
- 5305-00-144-9831 MPN NAS1218-06-9Machine Screw
- 5305-00-206-3653 MPN NAS517-4-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-2232 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1122E6 | National Aerospace Standards |