NSN 5305-01-438-2250
High Torque Screw
Between 1.823 inches and 1.853 inches fastener length, flat fillister head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123E25 for national stock number 5305014382250.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-2250.
-
MPN or Model
NAS1123E25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.823 inches and 1.853 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 5940-01-455-2461 MPN NAS1063A10-105BGTerminal Board Marker Strip
- 5305-00-007-9893 MPN NAS1102C04-13Machine Screw
- 5305-00-061-5115 MPN NAS1403-33Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-104-5073 MPN NAS1352-4LE40PSocket Head Cap Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
- 5305-00-150-3268 MPN MS24673-20Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-2250 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123E25 | National Aerospace Standards |