1-321-802-5889
Email Us

NSN 5305-01-438-3775

High Torque Screw

About this product

Between 0.660 inches and 0.690 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: patch threads or pellet threads or strip threads.

Manufacturer part number NAS1164-4 for national stock number 5305014383775.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-438-3775.

  • MPN or Model

    NAS1164-4

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    096640 - Screws, Iron Or Steel
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.400 inches and 0.450 inches
  • Fastener Length
    Between 0.660 inches and 0.690 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.449 inches and 0.507 inches
  • Locking Feature
    Patch threads or pellet threads or strip threads
  • Grip Diameter
    Between 0.2485 inches and 0.2495 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.240 inches and 0.250 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Surface Finish
    32.0 microinches threads
  • Part Name Assigned By Controlling Agency
    Navy special project
  • Material
    Steel comp 4140 or steel comp 8740
  • Surface Treatment
    Cadmium
  • Surface Treatment Specification
    Qq-p-416 tii c2 assn standard single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-438-3775 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305014383775

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NAS1164-4 National Aerospace Standards
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.