NSN 5305-01-438-7193
Bolt Stove
Between 0.967 inches and 1.000 inches fastener length, flat countersunk head style, between 0.244 inches and 0.279 inches head diameter, internal drive style: cross recess type iii.
Manufacturer part number MS51481-11 for national stock number 5305014387193.
Datasheet
-
Product description
Machine Screw NSN 5305-01-438-7193.
-
MPN or Model
MS51481-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.917 inches -
Fastener Length
Between 0.967 inches and 1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.244 inches and 0.279 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Astm a29, grades 1015 through 1030 and grades 1116 through 1132 assn standard all material responses -
Screw Surface Treatment
Zinc and chromate -
Screw Surface Treatment Specification
Astm b633, type 2 assn standard all treatment responses -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-003-2550 MPN MS3470L12-10PElectrical Receptacle Connector
- 5935-00-009-3157 MPN MS3476L20-41SNElectrical Plug Connector
- 4820-00-014-1306 MPN MS28893C8-2200Safety Relief Valve
- 5930-00-052-2437 MPN MS25344-1Sensitive Switch
- 5940-00-115-4991 MPN MS20659-131Lug Terminal
- 5935-00-133-1562 MPN MS3409D28-21SElectrical Plug Connector
- 5935-00-134-0398 MPN M2726-47-002Electrical Connector Insert
- 5935-00-177-2035 MPN MS3106E32-17SElectrical Plug Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-438-7193 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51481-11 | Military Standards |