NSN 5305-01-438-7956
High Torque Screw
1.953 inches fastener length, flat countersunk head style, 0.704 inches head diameter, grip diameter: 0.3735 inches .
Manufacturer part number NAS1206-25 for national stock number 5305014387956.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-7956.
-
MPN or Model
NAS1206-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
1.953 inches -
Head Style
Flat countersunk -
Head Diameter
0.704 inches -
Grip Diameter
0.3735 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.00 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1206 professional/industrial association standard
More from these suppliers
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-052-6364 MPN NAS1633-5DMachine Screw
- 5305-00-052-7477 MPN MS24627-69Tapping Screw
- 5305-00-057-4913 MPN MS24671-29Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-115-9391 MPN NAS600-32PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-7956 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1206-25 | National Aerospace Standards |