NSN 5305-01-438-8277
High Torque Screw
Between 1.954 inches and 1.984 inches fastener length, flat countersunk head style, 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1580A6T22 for national stock number 5305014388277.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-8277.
-
MPN or Model
NAS1580A6T22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.569 inches and 0.619 inches -
Fastener Length
Between 1.954 inches and 1.984 inches -
Head Style
Flat countersunk -
Head Diameter
0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-058-4019 MPN MS24694S121Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
- 5305-00-225-9102 MPN MS90726-47Hexagon Head Cap Screw
- 5305-00-230-9384 MPN NAS1218-3-20PMachine Screw
- 5305-00-376-8680 MPN NAS664V16HTClose Tolerance Screw
- 5305-00-489-9346 MPN NAS1190C04P16LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-8277 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A6T22 | National Aerospace Standards |