NSN 5305-01-438-8282
High Torque Screw
Between 1.848 inches and 1.878 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number NAS1578A3R24 for national stock number 5305014388282.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-8282.
-
MPN or Model
NAS1578A3R24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.848 inches and 1.878 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-003-8160 MPN NAS1351-5-28PSocket Head Cap Screw
- 5305-00-051-8497 MPN MS24625-28Tapping Screw
- 5305-00-052-0524 MPN MS24678-54CSocket Head Cap Screw
- 5305-00-059-8247 MPN MS35214-22Machine Screw
- 5305-00-059-8388 MPN MS35215-58Machine Screw
- 5305-00-061-7962 MPN NAS1204-20WClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-8282 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A3R24 | National Aerospace Standards |