NSN 5305-01-438-8283
High Torque Screw
Between 1.388 inches and 1.418 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578C4R16 for national stock number 5305014388283.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-8283.
-
MPN or Model
NAS1578C4R16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.388 inches and 1.418 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5305-00-007-6198 MPN NAS1631C26PMachine Screw
- 5305-00-052-9802 MPN MS24694C50Machine Screw
- 5305-00-082-6982 MPN NAS1190-3P5USocket Head Cap Screw
- 5305-00-093-6942 MPN NAS1352-5-28Socket Head Cap Screw
- 5305-00-106-4044 MPN NAS1100C5-10Machine Screw
- 5305-00-145-0865 MPN NAS1635-02LE5PSocket Head Cap Screw
- 5305-00-177-5679 MPN NAS388-6-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-8283 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C4R16 | National Aerospace Standards |