NSN 5305-01-438-8285
High Torque Screw
Between 1.361 inches and 1.391 inches fastener length, flat countersunk head style, 0.633 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1580A5R14 for national stock number 5305014388285.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-438-8285.
-
MPN or Model
NAS1580A5R14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.361 inches and 1.391 inches -
Head Style
Flat countersunk -
Head Diameter
0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-152-7883 MPN NAS1190E06P7LElectrical Connector Shell
- 5940-01-058-8888 MPN NAS1744-5Conductor Splice
- 5940-01-362-7188 MPN NAS1063Terminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-107-9271 MPN NAS1155V23DClose Tolerance Screw
- 5305-00-153-6355 MPN NAS1351-08H8PSocket Head Cap Screw
- 5305-00-156-2937 MPN MS35190-249Machine Screw
- 5305-00-206-0625 MPN NAS517-2-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-438-8285 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A5R14 | National Aerospace Standards |