NSN 5305-01-438-8787
Bolt Stove
Between 0.719 inches and 0.750 inches fastener length, flat countersunk undercut head style, between 0.021 inches and 0.034 inches head diameter, head height: 0.083 inches .
Manufacturer part number MS24693-74B for national stock number 5305014388787.
Datasheet
-
Product description
Machine Screw NSN 5305-01-438-8787.
-
MPN or Model
MS24693-74B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.667 inches -
Fastener Length
Between 0.719 inches and 0.750 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.021 inches and 0.034 inches -
Head Height
0.083 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Surface Treatment
Oxide -
Screw Surface Treatment Specification
Mil-c-13924 military specification single treatment response -
Color
Black -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-001-5920 MPN MS27484T14A35SAElectrical Plug Connector
- 5935-00-044-5980 MPN MS3140E27-50SElectrical Receptacle Connector
- 5935-00-074-4485 MPN MS3128E14-19PElectrical Receptacle Connector
- 5935-00-080-2641 MPN MS3114H20-16PElectrical Receptacle Connector
- 5950-00-103-4766 MPN MS3124E18-32SWPulse Transformer
- 5930-00-177-2076 MPN MS16109N38Rotary Switch
- 5950-00-243-0093 MPN MS75084-09Radio Frequency Coil
- 5935-00-246-1382 MPN MS24264R24B61PNElectrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-438-8787 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS24693-74B | Military Standards |