NSN 5305-01-440-0232
High Torque Screw
2.454 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: 0.3745 inches .
Manufacturer part number NAS8706-32 for national stock number 5305014400232.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-440-0232.
-
MPN or Model
NAS8706-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
2.454 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5737 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-502-4359 MPN NAS1666-12AElectrical Connector Cable Clamp
- 5935-00-810-7063 MPN NAS715-23CElectrical Receptacle Connector
- 1680-01-517-0717 MPN NAS1338A5C15DAircr Swing Arm Pin
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-053-1093 MPN MS35199-71Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-440-0232 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8706-32 | National Aerospace Standards |