NSN 5305-01-440-1345
High Torque Screw
Between 1.563 inches and 1.593 inches fastener length, flat countersunk head style, between 0.832 inches and 0.890 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS1157E18 for national stock number 5305014401345.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-440-1345.
-
MPN or Model
NAS1157E18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 1.563 inches and 1.593 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.832 inches and 0.890 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1157 professional/industrial association standard
More from these suppliers
- 5935-01-063-4525 MPN NAS1668-1Electrical Connector End Seal Plug
- 5940-01-376-5867 MPN NAS1063F-1-8Terminal Board Marker Strip
- 5940-01-413-3015 MPN NAS1063B231-237Terminal Board Marker Strip
- 5940-01-425-7387 MPN NAS1063C8-319Terminal Board Marker Strip
- 5305-00-003-6708 MPN NAS1096-1-13Machine Screw
- 5305-00-007-6173 MPN NAS1100E00-6Machine Screw
- 5305-00-016-8173 MPN MS27039-5-25Machine Screw
- 5305-00-038-6682 MPN NAS1581A3H4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-440-1345 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1157E18 | National Aerospace Standards |