NSN 5305-01-440-4970
High Torque Screw
Between 1.298 inches and 1.328 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1581C5R13 for national stock number 5305014404970.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-440-4970.
-
MPN or Model
NAS1581C5R13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.298 inches and 1.328 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-451-2578 MPN NAS1063C3-539DTerminal Board Marker Strip
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-051-6112 MPN NAS517-8-12Machine Screw
- 5305-00-060-7071 MPN NAS1190-3P8NSocket Head Cap Screw
- 5305-00-103-2959 MPN NAS1219-5-18PMachine Screw
- 5305-00-132-1379 MPN MS24625-32Tapping Screw
- 5305-00-150-9260 MPN NASM7839Machine Screw
- 5305-00-151-6173 MPN NAS1635-01-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-440-4970 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C5R13 | National Aerospace Standards |