NSN 5305-01-443-3165
High Torque Screw
Between 1.111 inches and 1.141 inches fastener length, flat countersunk head style, between 0.4289 inches and 0.4787 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number NAS1581C5T10 for national stock number 5305014433165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-3165.
-
MPN or Model
NAS1581C5T10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.486 inches and 0.516 inches -
Fastener Length
Between 1.111 inches and 1.141 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4289 inches and 0.4787 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-017acft -
Thread Diameter
0.312 inches -
Grip Length
Between 0.685 inches and 0.705 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response or ams5853 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-01-080-8127 MPN NAS1599Electrical Receptacle Connector
- 5940-01-413-3007 MPN NAS1063B166-185Terminal Board Marker Strip
- 5305-00-005-5927 MPN NAS1131-12Close Tolerance Screw
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-111-0721 MPN NAS1102-3-34Machine Screw
- 5305-00-242-7251 MPN MS51021-48Setscrew
- 5305-00-367-5636 MPN NAS1190E02P3Socket Head Cap Screw
- 5305-00-417-5264 MPN MS51959-34BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-3165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |
NAS1581C5T10 | National Aerospace Standards |