NSN 5305-01-443-3166
Bolt Stove
Between 1.813 inches and 1.875 inches fastener length, flat countersunk head style, between 0.442 inches and 0.507 inches head diameter, internal drive style: torque set.
Manufacturer part number NAS1189V4T30 for national stock number 5305014433166.
Datasheet
-
Product description
Machine Screw NSN 5305-01-443-3166.
-
MPN or Model
NAS1189V4T30
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.708 inches and 1.770 inches -
Fastener Length
Between 1.813 inches and 1.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.442 inches and 0.507 inches -
Internal Drive Style
Torque set -
End Application
C17a acft -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Titanium alloy uns r56400 -
Screw Material Specification
Ams4928 assn standard 1st material response or ams4967 assn standard 2nd material response -
Bearing Surface Of Head Surface Finish
32.0 microinches -
Thread Surface Finish
32.0 microinches -
Thread Series Designator
Unjf -
Specification Data
80205-nas1189 professional/industrial association standard
More from these suppliers
- 5940-01-425-6516 MPN NAS1063A5-449Terminal Board Marker Strip
- 5940-01-470-3343 MPN NAS1063A6-510BETerminal Board Marker Strip
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-043-2693 MPN MS24693-S292Machine Screw
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-443-3166 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |
NAS1189V4T30 | National Aerospace Standards |