NSN 5305-01-443-4917
High Torque Screw
Drilled head.
Manufacturer part number NAS1121E1H for national stock number 5305014434917.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-4917.
-
MPN or Model
NAS1121E1H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.338 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.221 inches and 0.226 inches -
Head Height
Between 0.074 inches and 0.076 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.138 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Passivate -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-929-7202 MPN NAS1196-10Electrica Connector
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-081-6728 MPN NASM24667-31Socket Head Cap Screw
- 5305-00-082-5113 MPN MS27039-4-14Machine Screw
- 5305-00-146-2474 MPN NAS602-34Machine Screw
- 5305-00-151-0011 MPN NASM24693-S302Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-4917 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1121E1H | National Aerospace Standards |