NSN 5305-01-443-6979
High Torque Screw
1.626 inches fastener length, flat countersunk head style, 0.4289 inches head diameter, head height: 0.070 inches .
Manufacturer part number NAS1581A5R18 for national stock number 5305014436979.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-6979.
-
MPN or Model
NAS1581A5R18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
1.626 inches -
Head Style
Flat countersunk -
Head Diameter
0.4289 inches -
Head Height
0.070 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-528-8440 MPN NAS1641R16T24SNElectrical Receptacle Connector
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-052-6364 MPN NAS1633-5DMachine Screw
- 5305-00-071-2229 MPN MS90725-22Hexagon Head Cap Screw
- 5305-00-079-7965 MPN MS24694S214Machine Screw
- 5305-00-141-3870 MPN NAS1352C08H20Socket Head Cap Screw
- 5305-00-225-9444 MPN MS16996-33Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-6979 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581A5R18 | National Aerospace Standards |
NAS1581F5R18 | National Aerospace Standards |