NSN 5305-01-443-6986
High Torque Screw
1.844 inches fastener length, flat countersunk head style, 0.5149 inches head diameter, head height: 0.081 inches .
Manufacturer part number NAS1581A6T20 for national stock number 5305014436986.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-6986.
-
MPN or Model
NAS1581A6T20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
1.844 inches -
Head Style
Flat countersunk -
Head Diameter
0.5149 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-0179 MPN NAS1063A20-4MLSTerminal Board Marker Strip
- 5305-00-008-5881 MPN NAS1101E003Machine Screw
- 5305-00-009-0517 MPN NAS1393C00-7Machine Screw
- 5305-00-057-0524 MPN MS51958-28Machine Screw
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-151-2723 MPN MILS7839Machine Screw
- 5305-00-161-0676 MPN NAS1081C04A6LSetscrew
- 5305-00-182-9506 MPN NAS662C2LNR5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-6986 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581A6T20 | National Aerospace Standards |
NAS1581F6T20 | National Aerospace Standards |