NSN 5305-01-443-7543
High Torque Screw
1.156 inches fastener length, flat countersunk head style, 0.5149 inches head diameter, head height: 0.081 inches .
Manufacturer part number NAS1581A6T9 for national stock number 5305014437543.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-7543.
-
MPN or Model
NAS1581A6T9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
1.156 inches -
Head Style
Flat countersunk -
Head Diameter
0.5149 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-116-5020 MPN NAS1100C6-8Machine Screw
- 5305-00-121-2419 MPN NAS1352C8LE32Socket Head Cap Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
- 5305-00-417-5070 MPN NAS662B2R3Machine Screw
- 5305-00-520-5568 MPN MS3212-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-7543 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581A6T9 | National Aerospace Standards |
NAS1581F6T9 | National Aerospace Standards |