NSN 5305-01-443-8385
High Torque Screw
Between 1.513 inches and 1.543 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1581C4T18 for national stock number 5305014438385.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-443-8385.
-
MPN or Model
NAS1581C4T18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.513 inches and 1.543 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-354-9982 MPN NAS1063A12-1000Terminal Board Marker Strip
- 5305-00-052-5940 MPN MS35198-82Machine Screw
- 5305-00-053-1106 MPN MS35199-111Machine Screw
- 5305-00-059-8515 MPN NAS1351-04-4Socket Head Cap Screw
- 5305-00-063-3834 MPN NAS1244-13Shoulder Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-443-8385 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C4T18 | National Aerospace Standards |