NSN 5305-01-444-0025
High Torque Screw
0.948 inches fastener length, round wedge head style, between 0.296 inches and 0.331 inches head diameter, head height: 0.072 inches .
Manufacturer part number NAS7502U10 for national stock number 5305014440025.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-444-0025.
-
MPN or Model
NAS7502U10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.948 inches -
Head Style
Round wedge -
Head Diameter
Between 0.296 inches and 0.331 inches -
Head Height
0.072 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas4003 assn standard single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-052-5923 MPN MS35198-69Machine Screw
- 5305-00-138-9914 MPN NAS662C2R15Machine Screw
- 5305-00-142-5083 MPN NAS1628-15Machine Screw
- 5305-00-149-9852 MPN NAS220-7Machine Screw
- 5305-00-167-3631 MPN AN525-416-8Machine Screw
- 5305-00-235-0379 MPN NAS1102E04-8Machine Screw
- 5305-00-245-5236 MPN NAS1352C04LE10Socket Head Cap Screw
- 5305-00-282-6256 MPN NAS220-28Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-444-0025 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7502U10 | National Aerospace Standards |