NSN 5305-01-444-1054
Panel Screw
2.300 inches fastener length, knurled no. 5 head style, 0.750 inches head diameter, head height: 0.500 inches .
Manufacturer part number 752-6404390-88 for national stock number 5305014441054.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-444-1054.
-
MPN or Model
752-6404390-88
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.600 inches -
Fastener Length
2.300 inches -
Head Style
Knurled no. 5 -
Head Diameter
0.750 inches -
Head Height
0.500 inches -
First Diameter From Head
0.188 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.700 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 304 -
Material Specification
Qq-s-763 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-288-7836 MPN 271-4900-958181PCV668Safety Relief Valve
- 4820-00-288-7842 MPN 435-2200-483960PCV14Safety Relief Valve
- 4820-00-334-3849 MPN AVP10S42-090PC389Valve Disk
- 4820-00-343-6466 MPN CVE55S4700-16959PC105Safety Relief Valve
- 5935-00-513-3689 MPN 2816537-3Plug-in Electronic Components Socket
- 5935-00-850-1510 MPN 3017644Electrical Plug Connector
- 5935-01-012-4568 MPN 2919950-1Plug-in Electronic Components Socket
- 5935-01-019-9872 MPN 5957979Electrical Connector Polarizing Key
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-444-1054 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
752-6404390-88 | Naval Sea Systems Command |
752-6404390-88 | Naval Sea Systems Command |
752-6404390-88 | Naval Sea Systems Command |
752-6404390-88 | Naval Sea Systems Command |