NSN 5305-01-445-5861
High Torque Screw
Dry film lube (threads only).
Manufacturer part number PBF1570-4-5L for national stock number 5305014455861.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-445-5861.
-
MPN or Model
PBF1570-4-5L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.498 inches -
Fastener Length
Between 0.785 inches and 0.825 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-01-054-6244 MPN PF1198-7-14Close Tolerance Screw
- 5305-01-054-6261 MPN PBF1166-3-6Close Tolerance Screw
- 5305-01-198-6509 MPN BACB30LR3-21Close Tolerance Screw
- 5305-01-279-1254 MPN BACB30NN3K2Close Tolerance Screw
- 5305-01-286-1762 MPN LD111-0044-0304Close Tolerance Screw
- 5305-01-329-9743 MPN PBF1484-3-6AClose Tolerance Screw
- 5305-01-350-4551 MPN PBF1417-3-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-445-5861 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |
PBF1570-4-5L | Sps Technologies, Llc |
03A415-4-5L | International Multifoods Corp |