NSN 5305-01-445-7645
High Torque Screw
Dry film lubricant threads only.
Manufacturer part number 03A416-4-11L for national stock number 5305014457645.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-445-7645.
-
MPN or Model
03A416-4-11L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.075 inches and 1.105 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.511 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-262-2628 MPN DAA3216P602-207Head Cartridge .75
- 5935-01-353-1484 MPN 05A091-1F07SElectrical Connector Backshell
- 1560-01-364-2657 MPN DAA3150A503-171Aircraft Fairing
- 1560-01-380-6125 MPN DAA3150A680-090Aircraft Fairing
- 1680-01-384-4509 MPN DAA3233A020-025Electrical-electronic Equipment Control Panel
- 5985-01-392-0922 MPN DAA3394P429-105Waveguide Assembly
- 5935-01-421-3722 MPN 05A092S32520CElectrical Connector Backshell
- 1560-01-423-9303 MPN DAA3420D129-338Aircraft Thermal Insulation
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-445-7645 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A416-4-11L | Northrop Grumman Systems Corporation |
PBF1571-4-11L | Sps Technologies, Llc |