NSN 5305-01-445-8804
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C9T for national stock number 5305014458804.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-445-8804.
-
MPN or Model
NAS2835C9T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-052-7004 MPN MS21295-36Socket Head Cap Screw
- 5305-00-150-9596 MPN MILS7839Machine Screw
- 5305-00-151-2525 MPN MILS7839Machine Screw
- 5305-00-182-9506 MPN NAS662C2LER5Socket Head Cap Screw
- 5305-00-225-3838 MPN MS90725-4Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-445-8804 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C9T | National Aerospace Standards |