NSN 5305-01-445-8806
High Torque Screw
Between 1.485 inches and 1.515 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C17T for national stock number 5305014458806.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-445-8806.
-
MPN or Model
NAS2835C17T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.485 inches and 1.515 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5940-00-498-0032 MPN NAS1745-25Conductor Splice
- 5940-01-432-4403 MPN NAS1063A16-507DTerminal Board Marker Strip
- 5305-00-058-4013 MPN MS24694S108Machine Screw
- 5305-00-069-4958 MPN MS24677-59Socket Head Cap Screw
- 5305-00-115-6187 MPN MS21097-3014Socket Head Cap Screw
- 5305-00-140-2081 MPN NAS1096-1-58Machine Screw
- 5305-00-193-5237 MPN NAS1741C04R8Socket Head Cap Screw
- 5305-00-205-3917 MPN MS27039-8-08Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-445-8806 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C17T | National Aerospace Standards |