NSN 5305-01-446-1334
High Torque Screw
Dry film lubricant-threads only.
Manufacturer part number 03A416-4-12L for national stock number 5305014461334.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-446-1334.
-
MPN or Model
03A416-4-12L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.511 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.735 inches and 0.765 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-308-3698 MPN DAA7229G309-001Aircraft Maintenance Fixture
- 1560-01-350-1411 MPN DAA3144A820-011Aircraft Structural Panel
- 1560-01-351-6755 MPN DAA3420D118-003Aircraft Structural Component Fitting
- 1560-01-398-9112 MPN DAA3150A698-042Aircraft Access Cover
- 1680-01-587-1691 MPN DAA3297A114-020Brake Pully Suppo Crank Assembly
- 1560-01-424-0435 MPN DAA3420D129-311Aircraft Thermal Insulation
- 5935-01-451-4539 MPN 05A212-02Electrical Connector Cover
- 1560-01-367-1225 MPN DAA3150A503-184Aircraft Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-446-1334 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A416-4-12L | Northrop Grumman Systems Corporation |
PBF1571-4-12L | Sps Technologies, Llc |