NSN 5305-01-447-1001
High Torque Screw
Between 2.326 inches and 2.356 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1580V4T31D for national stock number 5305014471001.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-1001.
-
MPN or Model
NAS1580V4T31D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 2.326 inches and 2.356 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches threads and 0.086 inches threads -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.938 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.225 inches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-454-3308 MPN NAS1653R12B10PNElectrical Plug Connector
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-007-6173 MPN NAS1100C00-6Machine Screw
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-022-3131 MPN NAS1352-3LL32PSocket Head Cap Screw
- 5305-00-067-9914 MPN MS24674-7Socket Head Cap Screw
- 5305-00-079-3715 MPN NAS608-8-28Socket Head Cap Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-1001 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V4T31D | National Aerospace Standards |