NSN 5305-01-447-3335
High Torque Screw
Between 1.798 inches and 1.828 inches fastener length, flat countersunk head style, between 0.575 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS7505-22 for national stock number 5305014473335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-3335.
-
MPN or Model
NAS7505-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.798 inches and 1.828 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.575 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas7505 professional/industrial association standard
More from these suppliers
- 5305-00-008-9115 MPN NAS1190C02T7LSocket Head Cap Screw
- 5305-00-307-1394 MPN NAS662C0LL6Socket Head Cap Screw
- 5305-00-419-0820 MPN MS16996-10BSocket Head Cap Screw
- 5305-00-432-4205 MPN MS51861-49Tapping Screw
- 5305-00-432-4393 MPN MS51862-18Tapping Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-527-4426 MPN NAS584-8TMachine Screw
- 5305-00-542-0122 MPN NAS1604T32Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-3335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
NAS7505-22 | National Aerospace Standards |
Stock Check
- NE: 40