NSN 5305-01-447-7006
High Torque Screw
Between 1.1105 inches and 1.1405 inches fastener length, flat countersunk head style, 0.577 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C11DT for national stock number 5305014477006.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-7006.
-
MPN or Model
NAS2835C11DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.1105 inches and 1.1405 inches -
Head Style
Flat countersunk -
Head Diameter
0.577 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.6775 inches and 0.6975 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.006 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams gaams5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5940-00-056-8696 MPN NAS1746-3Conductor Splice
- 5940-01-425-6523 MPN NAS1063A15-328Terminal Board Marker Strip
- 5935-01-323-4640 MPN MS33687-24-10PElectrical Connector Insert
- 1560-01-623-0437 MPN 520-14945-3Aircraft Stringer
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-052-7478 MPN MS24628-12Tapping Screw
- 5305-00-071-2499 MPN MS24694A96Machine Screw
- 5305-00-090-4080 MPN NAS1580A3H5DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-7006 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C11DT | National Aerospace Standards |