NSN 5305-01-447-7008
High Torque Screw
Between 1.673 inches and 1.703 inches fastener length, flat countersunk head style, 0.577 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C20DT for national stock number 5305014477008.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-7008.
-
MPN or Model
NAS2835C20DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.673 inches and 1.703 inches -
Head Style
Flat countersunk -
Head Diameter
0.577 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
18000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.006 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams gaams5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-007-1587 MPN NAS1102C02-5PMachine Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-052-5946 MPN MS35198-4Machine Screw
- 5305-00-058-4015 MPN MS24694S110Machine Screw
- 5305-00-104-5074 MPN NA1352-4LE44Socket Head Cap Screw
- 5305-00-141-6269 MPN MS35202-29Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-7008 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C20DT | National Aerospace Standards |