NSN 5305-01-447-7943
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2646 inches and 0.2651 inches .
Manufacturer part number NAS1581F4T7X for national stock number 5305014477943.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-7943.
-
MPN or Model
NAS1581F4T7X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2646 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-413-2993 MPN NAS1063B-31-40Terminal Board Marker Strip
- 1560-01-423-0218 MPN NAS6808D39Aircraft Structural Component Support
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-107-9312 MPN MS27039C0811Machine Screw
- 5305-00-143-1329 MPN NAS1402-29Machine Screw
- 5305-00-150-3446 MPN MS21090-462Socket Head Cap Screw
- 5305-00-205-3918 MPN MS27039-8-10Machine Screw
- 5305-00-225-9451 MPN MS16996-31Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-7943 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F4T7X | National Aerospace Standards |