NSN 5305-01-447-8705
High Torque Screw
Between 0.578 inches and 0.728 inches fastener length, flat countersunk head style, between 0.2578 inches and 0.3047 inches head diameter, grip diameter: between 0.2641 inches and 0.2651 inches .
Manufacturer part number NAS1581F3T4X for national stock number 5305014478705.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-447-8705.
-
MPN or Model
NAS1581F3T4X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.578 inches and 0.728 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2578 inches and 0.3047 inches -
Grip Diameter
Between 0.2641 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 federal standard 3rd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification 15th treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-00-280-1082 MPN NAS1745-6Conductor Splice
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-008-5898 MPN NAS1191-04P4LSocket Head Cap Screw
- 5305-00-008-7856 MPN NAS1742C04-6USocket Head Cap Screw
- 5305-00-008-7871 MPN NAS1191E04P3LSocket Head Cap Screw
- 5305-00-052-9971 MPN MS24619-25Tapping Screw
- 5305-00-057-9583 MPN MS35199-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-447-8705 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F3T4X | National Aerospace Standards |