NSN 5305-01-448-0530
High Torque Screw
Between 1.111 inches and 1.141 inches fastener length, flat countersunk head style, between 0.578 inches and 0.623 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number NAS1580C5R10 for national stock number 5305014480530.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-0530.
-
MPN or Model
NAS1580C5R10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.111 inches and 1.141 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.623 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-954-6759 MPN NAS1746-7Conductor Splice
- 5305-00-006-0633 MPN NAS514P428-14PMachine Screw
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
- 5305-00-032-3697 MPN NAS1352-08LL10PSocket Head Cap Screw
- 5305-00-050-4272 MPN NAS1096-2-4Machine Screw
- 5305-00-063-3840 MPN NAS1244-11Shoulder Screw
- 5305-00-114-1978 MPN NAS664V4HTClose Tolerance Screw
- 5305-00-150-3089 MPN NAS1100C08-7PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-0530 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C5R10 | National Aerospace Standards |