NSN 5305-01-448-0674
High Torque Screw
Between 0.986 inches and 1.001 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3427 inches and 0.3432 inches .
Manufacturer part number NAS1580C5T8Y for national stock number 5305014480674.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-0674.
-
MPN or Model
NAS1580C5T8Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.986 inches and 1.001 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3427 inches and 0.3432 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-009-0521 MPN NAS1102E04-4PMachine Screw
- 5305-00-050-9221 MPN MS24667-41Socket Head Cap Screw
- 5305-00-068-5276 MPN NAS1352C04-4Socket Head Cap Screw
- 5305-00-103-9762 MPN NAS1081-08D6Setscrew
- 5305-00-121-3564 MPN MS27577-4-16Close Tolerance Screw
- 5305-00-144-0538 MPN MS21090-349Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-0674 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C5T8Y | National Aerospace Standards |